RE: 5.1 6.1 surround

[Keith Doxey]

Hi Andy,

The KAT5 units you have contain two Audio circuits (Left and Right) and two
Video circuits (Composite/S-VideoLuma and S-VideoChroma)

If you wanted two you could send two composite + mono signals over the
units
by using Left + Comp/Luma for one circuit and Right + Chroma for the second
circuit.

To test the "Dolby digital" theory you will be restricted to
using Composite
Video instead of S-Video as you will need the chroma circuit to carry the
DD
signal.

Pinouts are as follows

Signal Type Transmitter Receiver

Left Audio 6 3
Right Audio 2 1
Comp/Luma Video 20 19
Chroma Video 15 15

Ground on all units on 4,5,9,13,14,17,18 any can be used

SCART pinout can be found on
<a href="http://www.btinternet.com/~diyha/electronics/scart.html";>http://www.btinternet.com/~diyha/electronics/scart.html</a>
or
<a href="http://www.btinternet.com/~diyha/kat5/userguide.html";>http://www.btinternet.com/~diyha/kat5/userguide.html</a>
a copy of which comes
with the units :-)

Why is it that I didnt notice that my previous message appears to have been
typed with broken fingers until AFTER I hit the send key :-(

Keith



-----Original Message-----
From: UKHA [mailto:<a
href="/group/kat5-users/post?postID=OhplUfZ-Qz597KmsRDLrzF-nmjZRgKrGtbBZOcj-zFdKeVCQnMdaub9Cq6a5GhkXeWPMf2xmZ7wUm5QHktxis6Yw6oedng">ukha@b...</a>]
Sent: 04 August 2002 13:11
To: <a
href="/group/kat5-users/post?postID=C4r7WtTeZRs7MTieng4snx6l2vkKZbe3XaBqWDGkMf4SDC5JtNedzK9fHD4EZ3qvrX1WIDF8ex_YVCz5kpanlycK0g">kat5-users@xxxxxxx</a>
Subject: RE: [KAT5] 5.1 6.1 surround



Keith,

call me Mr Thicky if you will but I don't understand.. where are the 2
video circuits? I have scarts on the tranmitter/receiver ..

can you dumb it down a little for me?

sorry

Andy

>As a test you can sed composite over the first video circuit and try
the
>5.1
>digital over the second video circuit used normally for S-Video.
>
>If it works then I can built unitsd with 4 video circuits that can be
used
>for
>
>RGBS or
>CompositeVideo + SVideo + DolbyDigital or
>ComponentVideo + DolbyDigital
>
>Keith