The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Scart -> S-video + 2 phono cable question


  • Subject: Re: Scart -> S-video + 2 phono cable question
  • From: bh9872000
  • Date: Mon, 05 Aug 2002 10:03:00 +0000

I'll have a go at switching the pins, but if in the meantime you
could get me a couple of those adaptors. (for a few quid it can't be
wrong)

Thanks,
Bruce.


--- In kat5-users@y..., "Keith Doxey" <keith.doxey@b...>
wrote:
> Hi Bruce,
>
> The pins that vary dependant on IN/OUT are
>
> 1-2 Right Audio
> 3-6 Left Audio
> 19-20 CompositeVideo/S-VideoLuma
>
> The EVEN numbers are used on INPUTS
> The ODD numbers are OUTPUTS
>
> One one of your leads you need to swap the wires over.
>
> You have stated that you are not really into DIY leads but the
changeober is
> qiute simple, either using a soldering iron of by carefully
releasing the
> latching tag that holds the pin in place, pulling the pin out of its
> existing hole and placing it back into its new home. (you may need
to flick
> the latching tag back out before reinserting the pin.
>
> Or you can use the adapters that Phil mentioned. I can obtain some
of these
> if you wish.
>
> Keith
>
> www.diyha.co.uk
> www.kat5.tv
>
>
> -----Original Message-----
> From: bh9872000 [mailto:Bruce@S...]
> Sent: 04 August 2002 20:02
> To: kat5-users@y...
> Subject: [KAT5] Scart -> S-video + 2 phono cable question
>
>
> I have recently bought two pairs of Kat5 transmitter/receivers.
>
> one is setup:
> s-video+2 phono to scart -> kat5
> kat5 -> scart to fully wired scart
>
> works a treat
>
> the other one needs to be:
> s-video+2 phono to scart -> kat5
> kat5 -> scart to s-video+2phono
>
> I have tried to setup this up but am getting no output.
>
> I guess this is because the cables are wired directionally.
> the s-video and audio cables must go to the input pins on the scart
> plug.
>
> my question is what is the easiest way to rectify this?
>
> I am not really into DIY cables so an alternative remedy would be
> preferred.
>
> (I have just noticed that versions are available with s-video and
> phono connections, would I be able to exchange them if I pay an
> upgrade fee?)
>
> Regards,
> Bruce.
>
>
>
> To unsubscribe from this group, send an email to:
> kat5-users-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>






KAT5 Main Index | KAT5 Thread Index | KAT5 Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.