[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Converting KAT5 AVS-RX to KAT5 AVS-RXU
- Subject: RE: Converting KAT5 AVS-RX to KAT5 AVS-RXU
- From: Graham Howe
- Date: Wed, 15 May 2002 16:07:00 +0000
> -----Original Message-----
> From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=M2K8o1PCg-ypbvyphbEF0dOovzw2uelG3QFYOsCeq49fJkzKclRzpgdK5B4fZC9rtlH7HbrwFM4ztyRTKC_2M6Y">keith.doxey@b...</a>]
> Sent: 15 May 2002 13:06
> To: <a
href="/group/kat5-users/post?postID=lhJRs4NPTN0TN8L8PXZjSIiQyBGYEpB0bcWtodzGmeIBDoipSwhcfy6MFcise5mz0ibTM1Ek3-UCxDLSi6efWw">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Converting KAT5 AVS-RX to KAT5 AVS-RXU
>
>
> Once IR is released there will be an upgrade for existing units.
>
> There will be redesigned units for new production. These will
> incorporate switchable termination.
>
> The switches will DISCONNECT the termination resistors NOT
> short them otherwise the signals would be terminated by a short.
>
> Shorting the resistors would guarantee that no unwanted noise
> would get through, but unfortunately it would also mean that
> the wanted signal would not get through either!!!
>
> Keith
>
I was wondering if you noticed my deliberate mistake about thew function
of the switches ;-)
Graham (publicly showing his electronic stupidity again)
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|