RE: KAT5 Cases

[Keith Doxey]

Hi Frank,

Do you know who the manufacturer is ?

Its the right sort of size but the removeable panels look to be plastic and
the case is white.

The cases I use for KAT5 are available in White with plastic end panels or
Black with aluminium end panels. The vast majority of people have specified
that they want black.

Thanks

Keith

-----Original Message-----
From: Frank Mc Alinden [mailto:<a
href="/group/kat5-users/post?postID=FyFkng_VtgyBOWXr92MVdI5qMR-PxuhICf9KlkRbaesR7GS79dOooTrj4oQ5JQd_4XcYf6IomdEms010">armagh@b...</a>]
Sent: 18 January 2003 11:00
To: <a
href="/group/kat5-users/post?postID=GF3N3kOD4uCciXDQ7iWojcjH1xLLV_1XM1qbtf_koh-zmDfaSAv_At3VfUj8GsyyCI3MxmEJj3UeUu2vHTFi6df-8Q">kat5-users@xxxxxxx</a>
Subject: Re: [KAT5] KAT5 Cases


Hi Keith
i have a box here its removable plate is 30mm x 130mm and the
box is 110mm deep.Have a look here ........
<a href="http://www.users.bigpond.com/armagh/page18.html";>http://www.users.bigpond.com/armagh/page18.html</a>
I think i pay approx $6:00
aussie

Frank

----- Original Message -----
From: Keith Doxey
To: <a
href="/group/kat5-users/post?postID=GF3N3kOD4uCciXDQ7iWojcjH1xLLV_1XM1qbtf_koh-zmDfaSAv_At3VfUj8GsyyCI3MxmEJj3UeUu2vHTFi6df-8Q">kat5-users@xxxxxxx</a>
Sent: Saturday, January 18, 2003 9:41 PM
Subject: RE: [KAT5] KAT5 Cases


Sure,

The existing cases are 35mm x 160mm x 90mm

I am looking for something about the same size and cost but the OTHER WAY
ROUND !

By that, I mean the orientation of the removeable panels. The ends of the
current boxes are the 35 x 90 faces, I need to be able to mount the
connectors on the 35 x 160 mm face.

The existing cases were chosen specifically because of the removeable end
panels which allow for easy machining of the connector plates. It also
means
that I can get loads of connector plates made in advance without having to
buy and store lots of cases.

To date the only cases I have found that have a removeable panel of the
size
I want tend to be about 200mm deep and cost 3 or 4 times the existing
ones.

Keith

-----Original Message-----
From: Mark McCall [mailto:<a
href="/group/kat5-users/post?postID=gZZq_ew2AU8nFW5nTwjg-H4ytQRWM_HLj7lLxEOJR6sLRrE_vOZ70WeP5BVAMPxotj_19wNEXEuZhlM">Mark@L...</a>]
Sent: 18 January 2003 10:25
To: <a
href="/group/kat5-users/post?postID=GF3N3kOD4uCciXDQ7iWojcjH1xLLV_1XM1qbtf_koh-zmDfaSAv_At3VfUj8GsyyCI3MxmEJj3UeUu2vHTFi6df-8Q">kat5-users@xxxxxxx</a>
Subject: Re: [KAT5] KAT5 &amp; IR


Keith

Is it possible to give a set of requirements/dimensions for the case so
anyone here or on UKHA_D could help track one down?

Thanks

M