Re: KAT5 & IR

[Chris Bond]

Its a good job there no pre-order facility on keiths website really :)
----- Original Message -----
From: <<a
href="/group/kat5-users/post?postID=VadUJ5XE97WPCiiOkkAMgMJjAazBrSw4p-t7fz6JV2ZOMyELt1OaGlLcPuA6aKA4bP5ZPo6SNRI">nickt@t...</a>>
To: <<a
href="/group/kat5-users/post?postID=NYc_-ywW4-JCeDfSUq4eDd6sqLXZ6lu3Zgwe5Iq16jOKQU3U6c9vBA4hsOHxVE03aa1fKuAUKAJhw67Suf75GTmn9vw">kat5-users@xxxxxxx</a>>
Sent: Tuesday, January 21, 2003 8:49 AM
Subject: Re: [KAT5] KAT5 &amp; IR


> Thanks for update Keith.
> Make sure you gear yourself up for high demand for the Mk2 units -
> IMO these will keep your production, sales &amp; distribution
departments
> very busy ;-)
>
> Nick
>
> --- In <a
href="/group/kat5-users/post?postID=NYc_-ywW4-JCeDfSUq4eDd6sqLXZ6lu3Zgwe5Iq16jOKQU3U6c9vBA4hsOHxVE03aa1fKuAUKAJhw67Suf75GTmn9vw">kat5-users@xxxxxxx</a>,
"Keith Doxey" <kat5users@d...>
> wrote:
> > Hi Nick,
> >
> > I will probably use the next size up from the current range of
> boxes. They
> > are slightly large at 135 x 135 x 51 mm and are available in
black
> or grey.
> >
> > The upgrade board will be a proper PCB that will plug into the
> original
> > board. Fitting it will be a case of soledring some connectors
into
> existing
> > holes on the PCB and carefully pushing the new board onto them. A
> hole will
> > have to be drilled in the end plate for the 3.5mm socket. Full
> instructions
> > will be supplied along with a sticky label to mark the drilling
> point on the
> > end plate.
> >
> > Keith
> >
> > www.diyha.co.uk
> > www.kat5.tv
> >
> >
> > -----Original Message-----
> > From: Nick Towers <nickt@t...> [mailto:nickt@t...]
> > Sent: 20 January 2003 14:47
> > To: <a
href="/group/kat5-users/post?postID=NYc_-ywW4-JCeDfSUq4eDd6sqLXZ6lu3Zgwe5Iq16jOKQU3U6c9vBA4hsOHxVE03aa1fKuAUKAJhw67Suf75GTmn9vw">kat5-users@xxxxxxx</a>
> > Subject: Re: [KAT5] KAT5 &amp; IR
> >
> >
> > Thanks Keith,
> > 2 things:
> > 1) In my opinion if you can only source a white box, then I dont
> > think that would stop you selling units.
> > 2) Whilst I'm sure you want to capitalise on selling the IR
upgrade
> > units, would you consider releasing the circuit diagrams,
relevant
> > instructions etc so those interested could make up their own?
This
> > might of course be unrealistic depending on complexity - I think
> > you'd need to be able to use Veroboard, also not too many changes
to
> > original units. Also you'd need to do it on an agreed "no
support"
> > basis - those of us impatient enough to do this would need to not
> > bother you with timeconsuming problems - I'm sure we all want to
see
> > the Mk2 units &amp; switcher getting your available time
&amp; attention.
> >
> > Nick
>
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=aTep18BJtupyLSS248tB_6RrklMYud1B3ydEHyz7Hc34-3LuzGzC33rfej3JR7RXnw3mYoas9bl1y3hYUiruFkX4sUUDENVWLh1mA94">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>
>