RE: Scart Splitter

[Keith Doxey]

How about an almost Zero cost option :-)

Make up a lead that goes from the Processor to TV but make it slightly
longer than you need.

Cut the cable and take the cut ends into a SCART plug for the KAT5
Transmitter.

As it stands, the signal would be double terminated so the picture would
degrade but... if you remove the lid from the transmitter you will find two
termination resistors on the rear of the SCART socket. Remove these and it
will be "perfick" :-)

Hope that helps

Keith

www.diyha.co.uk
www.kat5.tv


> -----Original Message-----
> From: deanxsewell [mailto:<a
href="/group/kat5-users/post?postID=XDZhjnm9PBX1zMg8akoy6j5AKXR-feg7brpadFw-IhjeyAQvRCMeO_dqdSd_vVmBMU88lptkBWTXFzE1Ng">dean_sewell@h...</a>]
> Sent: 18 September 2003 20:53
> To: <a
href="/group/kat5-users/post?postID=eVD7XnSiIworePiE565koF5kQhe5rcVHvcZGavn0gOQ1RJp07nmmOO_dfh_gFePuoIkhbxaKzHC_qV0uPKm9JGnZgJA">kat5-users@xxxxxxx</a>
> Subject: [KAT5] Scart Splitter
>
>
> Hi,
>
> I have just received my KAT5 kit and everything looks good so far...
>
> ...except I have discovered that my AV processor (Yamaha DSPE800)
> outputs to only one monitor output at a time, even though it has two
> outputs (S-Vid and Composite). As the Composite is required for the
> main TV, that means I have no signal to feed into the KAT5. Can
> anybody suggest a solution / product that enables me to use my
> single Composite to drive the TV and KAT5 without degrading the
> signal?
>
> Many thanks
>
> Dean
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Upgrade to 128-Bit SSL Security!
> <a href="http://us.click.yahoo.com/p7cEmB/s7qGAA/yigFAA/26EolB/TM";>http://us.click.yahoo.com/p7cEmB/s7qGAA/yigFAA/26EolB/TM</a>
> --------------------------------------------------------------
> -------~->
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=ZA5ti1Z743oGb3FNpPv0lIe3yuxiPmWwZ1sENakR4LvJC2xXGCT50A8RAvmaBzMY53ij51IYctWNbfMBts_9nFGRo56iNzO8c0M">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>