[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: [KAT5] Newbie type question...
- Subject: RE: [KAT5] Newbie type question...
- From: "Keith Doxey" <kat5users@xxxxxxxxxxx>
- Date: Sat, 4 Dec 2004 08:48:14 -0000
Hi Jon,
The output board for the switcher which drives 4 zones will also be
available as a single input 4 output KAT5 transmitter so it will do exactly
what you suggest and because each stage will have the IR circuitry you will
be able to have IR control from all 4 rooms rather than just the one
possible with multidrop.
If you wanted a single source to 8 rooms then it would just be a case of
using two of the boards.
Regards
Keith
> -----Original Message-----
> From: Jon Whiten [mailto:jon@xxxxxxx]
> Sent: 03 December 2004 10:40
> To: kat5-users@xxxxxxx
> Subject: RE: [KAT5] Newbie type question...
>
>
>
> Keith,
>
> Have you considered and what would be involved in providing a KAT5
> distribution Product? I'm thinking here of taking the output
> from a Kat5-TX
> and splitting/buffering it to drive several KAT5-RX modules with a new
> device - similar to a standard distribution amp but KAT5 specific
[RJ45 in
> and multiple RJ45 out].
>
>
> Regards
>
> Jon Whiten
> http://www.whiten.co.uk
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|