[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: [KAT5] KAT5 & Subwoofers
- Subject: RE: [KAT5] KAT5 & Subwoofers
- From: "Keith Doxey" <kat5users@xxxxxxxxxxx>
- Date: Fri, 3 Sep 2004 09:38:19 +0100
> -----Original Message-----
> From: frostie2001uk [mailto:neil@xxxxxxx]
> Subject: [KAT5] KAT5 & Subwoofers
>
>
> Is it possible to take the subwoofer pre out from an amp say in a
> central location, lets call that node0 ;) and run that using cat5
&
> kat5 to the subs location???
>
Absolutely :-)
In fact, if your subwofer has a balanced XLR connector on it you can use
just a KAT5 TX and feed the balanced signal directly from the
KAT5---CAT5---SUB by connecting as follows
Using LEFT Channel of KAT5
BLUE/White to XLR 2
WHITE/Blue to XLR 3
Using RIGHT Channel of KAT5
GREEN/White to XLR 2
WHITE/Green to XLR 3
If your Sub only has an unbalanced Phono then you will still need a KAT5
RX.
Hope that helps
Keith
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|