The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: [KAT5] RGB/svideo->VGA


  • Subject: RE: [KAT5] RGB/svideo->VGA
  • From: "Paul Gale" <groups@xxxxxxxxxxxxxxxx>
  • Date: Sat, 30 Jul 2005 11:02:16 +0100

Hi Keith,

Does that mean you are actively working on the VGA units rather than the
one you've had for a few years?

That'd be great if so :)

Paul.

> -----Original Message-----
> From: kat5-users@xxxxxxx [mailto:kat5-users@xxxxxxx] On
> Behalf Of Keith Doxey
> Sent: 29 July 2005 09:50
> To: kat5-users@xxxxxxx
> Subject: RE: [KAT5] RGB/svideo->VGA
>
> Hi Aashram,
>
> I dont have a VGA unit yet but it is under development.
>
> There are standalone converters that will take an S-Video or Composite
> signal and convert it to VGA. They tend to cost around ?70 - ?100.
> Standalone converters that upscale RGB are more expensive.
>
> If you have a PC connected to the LCD then consider the Sweetspot card
> from
> http://www.pluggedin.tv/sweetspot
>
> Regards
>
> Keith
>
> > -----Original Message-----
> > From: kat5-users@xxxxxxx [mailto:kat5-users@xxxxxxx]On
> > Behalf Of aashram
> > Sent: 29 July 2005 09:41
> > To: kat5-users@xxxxxxx
> > Subject: [KAT5] RGB/svideo->VGA
> >
> >
> > keith
> >
> > is it possible to transfer vga using the KAT5 ? better still can
> > I take the s-video or rgb signal from the kat5 and turn it into a
> > vga so I can view the picture on a lcd screen ?
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > Searchable KAT5 archive can be found at
> > http://www.ukha-archive.com/
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> Searchable KAT5 archive can be found at
> http://www.ukha-archive.com/
> Yahoo! Groups Links
>
>
>
>
>




KAT5 Main Index | KAT5 Thread Index | KAT5 Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.