[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
[KAT5] Audio Amplification in Switcher?
- Subject: [KAT5] Audio Amplification in Switcher?
- From: "big_red_748" <jmacnamara@xxxxxxxxxxx>
- Date: Mon, 21 Aug 2006 06:06:40 -0000
When the new modular KAT5 switcher is available (any update on when
that is likely to be?) will it provide amplified audio to send
directly to speakers?
If so,
1. Will it be stereo or Dolby 5.1 etc...?
2. Will you be able to control the volumne remotely?
It is just that all my ceiling speaker cables come back to node 0
which is where any audio/video switcher would also be situated and I
am in the midst of deciding how I am going to provide amplification
to the speakers. I don't want to buy an expensive multi zone amp if
it will all be integrated in the new switcher!
If not,
1. Any ideas on a cheap multi zone amp for 12 pairs of speakers?
Cheers,
John
Searchable KAT5 archive can be found at
http://www.ukha-archive.com/
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|