[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: DOS Command line X10
- To: ukha_d@xxxxxxx
- Subject: Re: DOS Command line X10
- From: Nigel Orr <Nigel.Orr@xxxxxxx>
- Date: Mon, 26 Jun 2000 09:20:11 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
At 13:53 23/06/00 +0100, you wrote:
>Is there a DOS command line X10 prog that I can use to send X10 off and
X10
>on commands to an appliance unit to turn my PC's speakers on and off
when
>the PC boots up and shuts down?
Having recently upgraded a PC, the new power supply has one annoying
'feature'- on the old one, the output mains socket switched on and off with
the PC, so I made up a IEC > 4-way 13A sockets, and everything I needed
to
come on and off with the PC got plugged into it (speakers, monitor etc).
But the new ATX power supply doesn't switch the output- why not? Is it
just because they reckon all monitors are now intelligent enough to turn
themselves on or off?
Nigel
------------------------------------------------------------------------
Accurate impartial advice on everything from laptops to table saws.
http://click.egroups.com/1/4634/9/_/2065/_/962007609/
------------------------------------------------------------------------
Home |
Main Index |
Thread Index
|