The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: RG6 vs CT100


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: LW10 wall switchs v.s Lamp Modules.


  • To: ukha_d <ukha_d@xxxxxxx>
  • Subject: RE: LW10 wall switchs v.s Lamp Modules.
  • From: Keith Doxey <keith.doxey@xxxxxxx>
  • Date: Tue, 7 Nov 2000 14:58:20 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Paul,

Welcome aboard :-)

This is a normal effect if the lamp rating is too low.

What you are seeing is the leakage current through the bulbs that is
neccesary for the wall switch to operate. The Wall switch is in series with
the live wire to the bulb and some current must flow at all times for the
switch to function.

With Lamp modules this isnt the case as they have a connection to neutral
so
derive their power supply directly from the mains.

I would guess that you have VERY low wattage lamps connected to the wall
switches in question.

I observed the same effect last year when I replaced the normal 60W bulb in
a room with a set of Christmas Lights rated at about 20W.

Try fitting a larger bulb in the lampholder and the effect will be much
less
noticable if at all.

Just so we know "who's who" and "who's where"
....what part of the country are you in?


regards

Keith


> -----Original Message-----
> From: Paul Wootton [mailto:paulw@xxxxxxx]
> Sent: 07 November 2000 12:58
> To: 'ukha_d@xxxxxxx'
> Subject: [ukha_d] LW10 wall switchs v.s Lamp Modules.
>
>
>
> Hi all,
>     Let me introduce myself; my name is Paul Wootton and I've
> been playing
> around with X10 stuff for the past few months.   I'm now in
> the process of
> moving home, and I'm taking the opportunity  to do some HA stuff.
>
>     Because of the way my new house (bungalow) is built it's
> not easy (read
> almost impossible) to pull cables through half of it, and
> rewinring the
> lighting with LD10's is also not a possibility.
> Consequently I'm going
> for changing the light switches to LW10's, and I've noticed a
> problem...
>
>     With the two (about 6 months old) LW10's I have at home;
> I can't dim
> them to full off; the attached lights stay on (at about
> 10-15% brightness);
> whereas the same bulbs driven from lamp modules will go
> completely dark.
> Has anyone else noticed this?  Any ideas what's going on?
>
> -- Paul --
>



-------------------------- eGroups Sponsor -------------------------~-~>
Create your business web site your way now at Bigstep.com.
It's the fast, easy way to get online, to promote your business,
and to sell your products and services. Try Bigstep.com now.
http://click.egroups.com/1/9183/3/_/2065/_/973609226/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.