The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Filters for CFL lamps


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: COMFORT QUESTION (Was RE: Modem Caller-ID question (long-ish))


  • To: ukha_d <ukha_d@xxxxxxx>
  • Subject: RE: COMFORT QUESTION (Was RE: Modem Caller-ID question (long-ish))
  • From: Keith Doxey <keith.doxey@xxxxxxx>
  • Date: Tue, 7 Nov 2000 17:06:53 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I havent had time to make the PCB but I have printouts of the component
overlays for

S-Video Transmitter
S-Video Receiver
Video Conferencing Unit

I have one of the actual boxes that will be used for KAT5 with a lifesize
PCB printout fitted into it. I also have the first mockups of a wallmount
SCART faceplate and 2 prototype ceiling mount IR receiver/blasters.

Looking forward to the meeting, less than 2 hours now :-)

Keith

> -----Original Message-----
> From: Mark McCall [mailto:mark@xxxxxxx]
> Sent: 07 November 2000 16:50
> To: ukha_d@xxxxxxx
> Subject: Re: COMFORT QUESTION (Was RE: [ukha_d] Modem
> Caller-ID question
> (long-ish))
>
>
> You're too busy thinking about the meeting tonight - will you
> be showing the
> next range of KAT5 prototypes?
>
> M.
>
>
> ----- Original Message -----
> From: "Keith Doxey" <keith.doxey@xxxxxxx>
> To: "ukha_d" <ukha_d@xxxxxxx>
> Sent: Tuesday, November 07, 2000 4:42 PM
> Subject: RE: COMFORT QUESTION (Was RE: [ukha_d] Modem
> Caller-ID question
> (long-ish))
>
>
> > I meant for testing.
> >
> > Also not having a Comfort I forgot about the Answering machine
> capabilities
> > :-(
> >
> > Keith
> >
> > > -----Original Message-----
> > > From: Mark McCall [mailto:mark@xxxxxxx]
> > > Sent: 07 November 2000 16:35
> > > To: ukha_d@xxxxxxx
> > > Subject: Re: COMFORT QUESTION (Was RE: [ukha_d] Modem
> > > Caller-ID question
> > > (long-ish))
> > >
> > >
> > > > If you have Home Highway, why not try Comfort on
> Analogue 2 instead.
> > >
> > > This is no good if you want to use Comforts answering
machine
> > > and people
> > > have your lin1 number Keith - or did you mean just to jest?
> > >
> > > > I assume that the alarm will go off because Comfort
senses
> > > the loss of
> > > > voltage on the line as being a line fault. With Home
> > > Highway there is
> > > always
> > > > voltage present at the analogue ports even when there
> isnt a line
> > > available
> > > > because both channels are in use. This would mean that
> > > Comfort couldnt get
> > > > dial tone to dial out.
> > >
> > > I disabled the line test on my Comfort shortly after getting
> > > it as the house
> > > had been woken too may times in the middle of the night
> reporting line
> > > faults (and I have HH).
> > >
> > > M.
> > >
> > >
> > >
> > >
> > > -------------------------- eGroups Sponsor
> > > -------------------------~-~>
> > > eLerts
> > > It's Easy. It's Fun. Best of All, it's Free!
> > > http://click.egroups.com/1/9699/3/_/2065/_/973614896/
> > >
--------------------------------------------------------------
> > > -------_->
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
> -------------------------- eGroups Sponsor
> -------------------------~-~>
> No bidding, no
> guesswork.  Just
> great fares at Hotwire.
> http://click.egroups.com/1/9750/3/_/2065/_/973615915/
> --------------------------------------------------------------
> -------_->
>
>
>
>


-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/3/_/2065/_/973616867/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.