The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Comfort reads Pronto ccf files!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: BT HomeHighway conversion


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: BT HomeHighway conversion
  • From: "Jon Whiten" <jon@xxxxxxx>
  • Date: Mon, 27 Nov 2000 17:30:12 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I had a similar situation last year when I converted.  The BT guy just
wired
it up for me when he put the box in.

Prior to HH installation the only extension I had was in the Garage
(Kitchen
phone plugs in here without any wires showing at all!) and I stole three of
the spare cores in the BT cable (That ran through the Garage) to run back
from the old master socket to this new socket.

The old master socket now has "Digital" or some such written on
it and the
HH box was put in the office.  The Telephone socket on the front of the old
master socket is wired into Analogue 1.

BT did not complain and just connected the wiring into the HH system.

Regards,

Jon
+--------------Personal------------+----------Work-----------+
Jon Whiten        Church Gresley   D.G. Controls Limited
Derbyshire  Beacon Lamp Specialists
jon@xxxxxxx         England      mail@xxxxxxx
http://www.whiten.co.uk/          
http://www.deegee.com
+----------------------------------+-------------------------+



-----Original Message-----
From: Christopher Williams [mailto:ccwilliams@xxxxxxx]
Sent: 27 November 2000 13:16
To: ukha_d@xxxxxxx
Subject: [ukha_d] BT HomeHighway conversion


Hi all,

I have a quick question re: conversion to HomeHighway:

Currently my house extensions are wited using solid core cable.  This
is connected to the BT master socket by Krone? terminals.  The main
socket is in two halves and the bit with the krone terminals plugs
into the main bit ( the plug ans socket is internal to the box ). Hope
that makes sense.

The question is, when I have HH installed in two weeks, how will
I/BT?? connect the solid core wire to the Analogue phone socket on the
HH box?  Does it have a similar means of connecting solid core wire?

Many thanks for your advice.

Cheers

Chris Williams







-------------------------- eGroups Sponsor -------------------------~-~>
eGroups eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9698/3/_/2065/_/975346333/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.