[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
X-10 dimming
- To: ukha_d@xxxxxxx
- Subject: X-10 dimming
- From: "Mark Harrison" <Mark_Harrison_UK@xxxxxxx>
- Date: Fri, 22 Dec 2000 11:31:35 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Guys,
Sorry if this is an FAQ, but as you know, I've finally turned to the
dark side and installed some X-10 instead of hardwiring yet more
cables ;-)
I have, among other things, an LM12U and an LW10U. These control,
respectively a bedside lamp and the main light in our bedroom.
If I "keep dimming" the LM12U, it ultimately goes dark.
If I "keep dimming" the LW10U, it stays at a low level, but never
goes dark completely.
Given that the plan for "default overnight state" is to dim to
zero,
then dim up 20% on PIR trigger for 5 minutes in the other rooms, this
is a problem if I can't dim to black. (Obviously if X-10 had a dim up
to 20% from off without going to full first...)
Two questions:
1: Is this LW10U behaviour normal?
2: Which behaviour do the DIN rail dimmer exhibit?
Regards,
Mark
-------------------------- eGroups Sponsor -------------------------~-~>
With US & International rates as low as 3.9c a minute from Net2Phone
Direct Plus Up to 1500 FREE minutes; you can call everyone on your list!
http://click.egroups.com/1/10924/1/_/2065/_/977484702/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|