The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Spurious X-10 signals

To: ukha_d@xxxxxxx
Subject: Re: Spurious X-10 signals
From: Julian Driver <julian@xxxxxxx>
Date: Sat, 23 Dec 2000 07:38:41 +0000
Delivered-to: rich@xxxxxxx
Delivered-to: mailing list ukha_d@xxxxxxx
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
References: <11517AB64EFED3119DF1002018B9AC2704E01F@xxxxxxx>
Reply-to: ukha_d@xxxxxxx

No, don't have a CM12U. Good thought though.

In message <11517AB64EFED3119DF1002018B9AC2704E01F@xxxxxxx>,
REB.Barnett@xxxxxxx writes
>
>    > Has anybody else had this sort of problem, or for that matter
any
>    > problems when there are two X-10 controllers on the same
>    circuits?
>
>    If you have a CM12U connected, there was a year 2000 issue with
>    these which
>    would cause random X10 events and blocks to occur.
>
>    Ray Barnett.
>
>
>
>
>
>    eGroups Sponsor Click Here!

--
Julian Driver

-------------------------- eGroups Sponsor -------------------------~-~>
With US & International rates as low as 3.9c a minute from Net2Phone
Direct Plus Up to 1500 FREE minutes; you can call everyone on your list!
http://click.egroups.com/1/10924/1/_/2065/_/977557214/
---------------------------------------------------------------------_->

References:
- RE: Spurious X-10 signals
  - From: REB.Barnett@xxxxxxx

Prev by Date: Re: Happy Christmas!
Next by Date: Re: Big disk - problems - (long-ish)
Previous by thread: RE: Spurious X-10 signals
Next by thread: RE: Spurious X-10 signals
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.