[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: X10 Problems
> expect, for example I've got a Lavalamp on one LM12 which is set to
dim
> gradually after it's been on a while to prevent overheating. The dim
> commands (5% relative) continue to be sent after it has gone off, this
> I can deal with by adding a few more conditions to the trigger, but
> sometimes the lamp comes back on, why? Also the lamp flickers when
the
> module is set to 100%, dimming it to about 85% stops it, why? The
bulb
> in the unit is a reflectorised spot lamp, but not halogen.
LM12 has to have a minimum of 40W bulb. Your lava lamp is probably 30W or
35W which explains the strange behaviour.
M.
-------------------------- eGroups Sponsor -------------------------~-~>
Restaurants, Movies, Weather, Traffic & More!
Access Tellme from any phone. For more info visit:
http://click.egroups.com/1/9534/9/_/2065/_/970650367/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|