RE: Keith, You'll know this....

["Des Gibbons" <des@xxxxxxx>]

Which means that the output from these modems is compatible with software designed for US CID? Anyone?

 

DesG

-----Original Message-----
From: Keith Doxey [mailto:keith.doxey@xxxxxxx]
Sent: 07 October 2000 19:34
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Keith, You'll know this....

AHA !

 

So I was right.

 

Maybe its a feature of the modem softwa¸Õ…‹ then.

 

Keith

-----Original Message-----
From: Graham Kiff [mailto:graham.kiff@xxxxxxx]
Sent: 07 October 2000 19:08
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Keith, You'll know this....

This is how I have got mine setup, I'm using HomeVision and a Solwise Caller ID unit.  The text definitely appears on the screen just before I hear the first ring.

 

Graham

-----Original Message-----
From: Mark McCall [mailto:mark@xxxxxxx]
Sent: 07 October 2000 19:02
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Keith, You'll know this....

I definately have seen CID BEFORE the first ring.

In my old house I had HV displaying CID overlayed on to the TV picture.
Sometimes you would see who was calling before you heard the phone ring.

M.


  >-----Original Message-----
  >From:
  >sentto-1109639-2625-970938252-mark=automatedhome.co.uk@xxxxxxx  >om
  >[mailto:sentto-1109639-2625-970938252-mark=automatedhome.co.uk@xxxxxxx  >nelist.com]On Behalf Of Keith Doxey
  >Sent: Saturday, October 07, 2000 6:03 PM
  >To: ukha_d@xxxxxxx  >Subject: RE: [ukha_d] Keith, You'll know this....
  >
  >
  >Hi Paul,
  >
  >I sit corrected :-)
  >
  >Just tried the very same thing on my Home Highway box with my
  >Pace 56 Voice.
  >
  >
  >RING
  >
  >DATE = 1007
  >TIME = 1755
  >NMBR = 07802-773085
  >
  >RING
  >
  >RING
  >
  >Strange. I definately read something that said what I had told you. Just
  >goes to show that not everything you read is true :-)
  >
  >Maybe the UK spec "allows" for it to be sent first incase its ever
  >implemented.
  >
  >Keith
  >
  >
  >
  >> >In the States I belive Caller ID is sent BETWEEN the first and
  >> second ring.
  >> >The UK spec was adapted to send Caller ID BEFORE the first ring
  >> so that it
  >> >could be used for remote reading of the electricity meter etc
  >where the
  >> >device would answer the call bfore the phone rang so as not to disturb
  >> >householders in the dead of night.
 Ámjt;> >
  >>
  >> This is curious, as I have come across this suggestion before,
  >however, I
  >> can quite definately state the MY caller-ID comes BETWEEN the 1st & 2nd
  >> rings. - I have monitored incoming calls in Hyperterminal, and I
  >> can quite
  >> plainly see the call progress, and the data arriving.
  >
  >
  >
  >
  >
  >