[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Lutron
- To: ukha_d@xxxxxxx
- Subject: Lutron
- From: chris@xxxxxxx
- Date: Tue, 10 Oct 2000 10:57:50 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi Folks
Has anyone here used Lutron products? Is the whole
house lighting system prohibitively expensive as
everyone seems to go the X10 route?
Can the Lutron system communicate with something
like Homevision? Is it possible to map switches in
a switchplate to control thigs such as curtains?
If I go the X10 route I figure I need about 8 consumer
units worth of DIN modules which will take up a good
chunk of the proposed wiring closet! I also have a
problem with current X10 lamp modules and wall switches
in that the fuse tends to blow when a buld goes. Is this
normal and are there any cures? All wiring is a couple
of years old, is massively overspecced and has ELCBs.
Regards
Chris
-------------------------- eGroups Sponsor -------------------------~-~>
Dial 1-800-555-TELL -- You Won't Believe Your Ears!
For more details, click here:
http://click.egroups.com/1/9537/9/_/2065/_/971175480/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|