The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Missing messages- anyone else?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Homevision IR JACK


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: Homevision IR JACK
  • From: Eamon O'Gorman <eamonogorman@xxxxxxx>
  • Date: Sat, 21 Oct 2000 01:17:47 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Part no is 1203c (I think that's an indication of prom no). Anyway I only
bought it about 6- months ago, so I think I have the latest prom. I'm using
version 2.9 beta software that I downloaded from CSI, do you think this may
be the problem ?

Eamon

-----Original Message-----
From:	Alan Cockerton [SMTP:alancc@xxxxxxx]
Sent:	Friday, October 20, 2000 10:46 PM
To:	ukha_d@xxxxxxx
Subject:	Re: [ukha_d] Homevision IR JACK

What version of prom and software are you on

Alancc

----- Original Message -----
From: "Eamon O'Gorman" <eamonogorman@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, October 20, 2000 10:03 PM
Subject: RE: [ukha_d] Homevision IR JACK


> Thanks Mike, it seems to work fine. However I am having one small
problem.
> I am trying to get HV to transmit an IR signal on receipt of another
IR
> signal. This doesn't seem to work though. I think the problem may be
with
> the signal I am trying to transmit (a signal from a Jerold cable TV
box).
> Does anyone know if there are nay problems with these boxes ?.
>
>   If I set HV to learn the carrier signal, it doesn't seem to be able
to
> learn, but if I get it to learn normally, it seems to learn, but the
TX
of
> the signal does not work. In the IR test section of HV, it also does
not
> read the signal.
>   Any ideas ?
>
> Regards,
>
> Eamon
>
> -----Original Message-----
> From: Mike Huggins [SMTP:mikeh@xxxxxxx]
> Sent: Friday, October 20, 2000 5:12 PM
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Homevision IR JACK
>
> Nope, your're right. That's about all there is to it ! :-) Obviously
get
> the
> poliarity right or it won't work
>
> Mike
>
>
> ----- Original Message -----
> From: "Eamon O'Gorman" <eamonogorman@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Friday, October 20, 2000 5:46 PM
> Subject: [ukha_d] Homevision IR JACK
>
>
> >
> >
> > Hi,
> >
> >
> > Can anyone tell me what I need to do to transmit IR through the
rear
Jack
> > on Homevision. Is it just a simple case of buying an IR LED and
> connecting
> > it into the rear jack or is there a bit more to it ?
> >
> > Regards,
> >
> > Eamon
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>






-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/9/_/2065/_/972086408/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.