[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: ProntoEdit and Win2K
- To: ukha_d@xxxxxxx
- Subject: Re: ProntoEdit and Win2K
- From: "Patrick Lidstone" <patrick@xxxxxxx>
- Date: Mon, 18 Sep 2000 10:32:39 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
--- In ukha_d@xxxxxxx, Calum Morrell <calum@m...> wrote:
> Patrick, I don't have any knowledge of pronto edit personally, but
if it
> works on NT4, Win2K is just the consumer name for NT5.
>
> If it doesn't connect, do you have USB or IRDA support on your
system? If
> so, ensure there's no conflict with the com port the serial cable's
on - the
> pronto does use serial doesn't it??
>
> I've seen a lot of systems where IRDA uses a virtual com1 blocking
the main
> serial. I have to reset this on one of my systems every time I re-
build to
> get my Palm V hotsyncing.
>
> good luck
Seems that the pronto is a bit picky about its serial ports. I
installed ProntoEdit on two NT4 machines at home, but it only
recognised the serial ports on one. Whether the problems with the
Win2K system are related is anyones guess. Frustating, but at least I
can edit my ccfs now.
Patrick
Home |
Main Index |
Thread Index
|