[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Infra red transceivers
- To: <ukha_d@xxxxxxx>
- Subject: Re: Infra red transceivers
- From: "Mark McCall" <mark@xxxxxxx>
- Date: Mon, 25 Sep 2000 14:12:45 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <H00000ab005d240c@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
-------------------------- eGroups Sponsor -------------------------~-~>
GET A NEXTCARD VISA, in 30 seconds! Get rates
as low as 0.0% Intro APR and no annual fee!
Apply NOW!
http://click.egroups.com/1/9332/9/_/2065/_/969887574/
---------------------------------------------------------------------_->
> I've done my first X10 appliance now and am about to do a few more. A
> CM12U is on my shopping list for some basic macros, and an infrared
> transceiver. I believe that there are two of these, one is CE
approved
> and expensive, the other isn't.
>
> Should I buy the CE one or should I save the money, or does it depend
> on my conscience?
I think the CE approved one on the www.letsautomate.com site is basically
as
cheap as the older non-approved one.
> I also have an old One For All 8 remote, bought from Rumbelows in
their
> liquidataion sale, although I now use a Remote Angel :-(. The OFA8
has
> HA capabilities which I intend to program into the Angel but I'm not
> sure how the buttons translate to X10 commands, does anyone know, is
it
> obvious, can I get guidelines from a website or do I need a new
remote?
You need to chuck the Angel and buy a Pronto!
> I know I need to upgrade the Remote Angel to a Pronto, but that's not
> the answer I'm looking for today!
Ah...right :-)
M.
Home |
Main Index |
Thread Index
|