[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Rewiring
- To: <ukha_d@xxxxxxx>
- Subject: RE: Rewiring
- From: "Ian" <Ian.Bird@xxxxxxx>
- Date: Tue, 26 Sep 2000 13:40:01 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I have used these switches from which work a treat and won't break the
bank. I also reused a two way light circuit with some inventive thinking so
retro fitting is possible.
http://www.comforthomecontrols.com/products/index.html
Once there go to DIN RAIL X-10 Modules and the MK switches are about two
thirds of the way down the page.
Ian
-----Original Message-----
From: Michael Mc Aree [mailto:michael.mcaree@xxxxxxx]
Sent: 26 September 2000 13:22
To: ukha_d@xxxxxxx
Subject: [ukha_d] Rewiring
OK, I have now got 'Sale Agreed' on a house that needs rewiring. I want to
be as forward thinking as possible and want all the light fixtures wired
back to LD10/LD11 in a central consumer unit at some point but, due to
financial constraints, not on day one.
What do I need to tell the electrician or prepare myself?
What type of switches are best with LD10? The brass ones on LetsAutomate?
are there cheaper alternatives?
If I go for the ones on LetsAutomate can I install the 35mm deep mounting
box and put on a standard light switch in the mean time?
Any ideas greatly appreciated!
Michael
-------------------------- eGroups Sponsor -------------------------~-~>
Get a NextCard Visa, in 30 seconds!
1. Fill in the brief application
2. Get rates as low as 2.99% Intro APR with NO annual fee!
http://click.egroups.com/1/9335/9/_/2065/_/969971997/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|