The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Automatic Irrigation


  • To: ukha_d@xxxxxxx
  • Subject: RE: Automatic Irrigation
  • From: Nigel Orr <Nigel.Orr@xxxxxxx>
  • Date: Thu, 28 Sep 2000 09:46:13 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

At 09:20 28/09/00 +0100, you wrote:
>Simple 12v diaphragm or solenoid valve on the water supply powered from
>the 12v comfort output.

Is there a commonly used mechanical failsafe to stop it running continously
if the solenoid fails or jams?  Maybe you could use a ballcock arrangement
in the water to mechanically shut it off if it gets too full?  Or just
close down the water supply so it's fastest flow is only slightly more than
the fastest rate that the water can go down?

If it's at the bottom of the garden or something, you might not notice the
water running continuously if there's a fault.

Nigel


-------------------------- eGroups Sponsor -------------------------~-~>
Get a NextCard Visa with rates as low as 2.99% Intro APR!
1.  Fill in the brief application
2.  Get approval decisions in 30 seconds!
http://click.egroups.com/1/9334/9/_/2065/_/970130733/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.