[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
x10 problems
- To: <ukha_d@xxxxxxx>
- Subject: x10 problems
- From: "Gareth Cook/STA/Lotus" <gcook@xxxxxxx>
- Date: Mon, 9 Apr 2001 11:50:27 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
OK Gang
I have various x10 modules. I have now plugged an appliance module into the
feed that powers the garage - it has it's own garage RCD unit. Sending any
commands to this device do NOT work.
But, I have a CM12 plugged into my PC (which is plugged into the garage
mains too) - and I can send commands to that (it's on the same bit of
wire), and it then can also send commands around the house. What I've had
to do it enable a macro - so I send an "On" command to code16
(mapped into
the Cm12) - which in turn send a command "On" for the unit 9 (the
appliance
module).
Any ideas ?
G.
-------------+-----------------------------+----------------+--------------------
(Embedded Gareth Cook Office: +44 Work:
image moved Senior Engineering (0) 1784 445 gcook@xxxxxxx
to file: Specialist 166 Personal:
pic26869.jpg GeT IT Mobile: +44 g@xxxxxxx
) Engineering,Networks,Securit (0) 7980 445 AOL AIM : theboyg
y 166 Pager :
IBM SWG, Lotus Park, Fax: +44 gpage.csc1@xxxxxxx
Staines, TW18 3AG (0) 1784 499 m
166
-------------+-----------------------------+----------------+--------------------
Home |
Main Index |
Thread Index
|