The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: [OT]ish Router +modem problem


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CCTV Cameras



Mick,

I purchased some which (although not the same name) use the same s-video
ty=
pe connector. This provides not only video (and audio on some of their
came=
ras) but power too. Like (I'm assuming there!!) you I only have the one
vid=
eo capture card but I use an ASEL switcher. This costs about $149 from
http=
://www.controlanything.com (plus a little on import duty) but it does have
=
the advantage that it is RS232 controlled. I can switch between a number
of=
cameras with a small application that i wrote (to interface with HomeSeer)=
.=20

As for the cameras... to be quite honest they're cr*p. but cheapish if you
=
get them on a closing down sale (like many a Homebase is doing) i went for
=
the single s-video type models for convenience really-- you don't have to
r=
un loads of wires to the point you want to use them at.... but I'd really
o=
nly buy (either of these) if you can either get them dirt cheap, you're
str=
apped for cash or you like cr*ppy images...

as always  =A30.02

A.

*********** REPLY SEPARATOR  ***********

On 14/04/01 at 10:34 Mick Furlong wrote:

>Hi all
>
>I have been looking at the Response and Micromark  cameras and can't
>decide which to go for.
>
>The Micromark cameras seem to have an Svideo type plug and the
>Response use a RJ11 but both then convert to a scart I think..
>
>What I plan doing is linking a number of cameras to a AV switcher and
>then linking this into a Video Capture Card in my HA PC.=20
>
>Does anyone know which of these cameras would be easiest to interface
>to the AV switcher and if there are any other problems to watch out
>for?
>
>The reason for using a proper AV Switich rather than the Response or
>Micromark ones is that I can get one with IR Remote and so control it
>from the PC in software. The Units they sell specifically for the CCTV
>cameras seem to have either an RF remote or no remote at all.
>
>Any thoughts or advice on the feasibility of this or on the quality of
>the response vs micromark cameras?
>
>Thanks
>Mick
>
>
>
>
>
>
>
>
>=20
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


--- Tag-it! v2.0 (c) Andy Powell ,1998,1999,2000...and beyond..

I love the smell of echomail in the morning...




  • References:
Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.