The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Sources for X10 stuff

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: BT caller ID(again)

To: ukha_d@xxxxxxx
Subject: Re: Re: BT caller ID(again)
From: Stuart Grimshaw <stuart@xxxxxxx>
Date: Wed, 1 Aug 2001 13:57:22 +0100
Delivered-to: rich@xxxxxxx
Delivered-to: mailing list ukha_d@xxxxxxx
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx m
References: <9jgq5v+58sg@xxxxxxx> <002e01c11a85$58f665c0$30e4fc3e@xxxxxxx> <p05100301b78da93198b5@[10.18.4.102]>
Reply-to: ukha_d@xxxxxxx

I'd certainly be interested, even if no-one else is....

On Wednesday 01 August 2001 13:48 pm, Kevin Hawkins wrote:
> 	I have done this - you can pick up a point on the pcb where
> the TTL level serial data has been already decoded by the modem
> before being passed to the processor to decode the CLIP packet.

--

Stuart Grimshaw <stuart@xxxxxxx>
-
t:07976 625221
f:0870 7060260

References:
- Re: Re: BT caller ID(again)
  - From: "Mark Johnson" <poco.loco@xxxxxxx>
- Re: Re: BT caller ID(again)
  - From: Kevin Hawkins <tivo@xxxxxxx>

Prev by Date: Re: Be aware guys - Someone called BRAD sent me a virus DIRECTLY :-(
Next by Date: RE: Which Ipaq
Previous by thread: Re: Re: BT caller ID(again)
Next by thread: Re: Re: BT caller ID(again)
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.