The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: BT - What a Laugh!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Digital Interconnect Review


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Digital Interconnect Review
  • From: "Timothy Morris" <timothy.morris@xxxxxxx>
  • Date: Sat, 4 Aug 2001 00:38:48 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

There you go - if you ever get the chance to repeat the test with the Siltech do try it - I'll swear that the female vocals on "Carry on up the Charts" by The Beautiful South sound much clearer with the Siltech HF6 (£150) versus the Supra EFF-I (£45). You might also want to try it using a "proper" CD transport rather than a DVD player. While my Arcam DV-88 works as well as my Audiolab 8000CD when used as a transport (it isn't as good as a straight CD player - and in fact the late Bob Tomalski compared it to the Meridian 508 when used as a pure CD transport), my old Panasonic DVD A350 was pants in comparison. I'm not saying that your results are invalid - just suggesting a way that you *may* be able to hear the same difference that I *think* I heard.
 
There are those (not me) that say bi-wiring makes no difference so it really is whatever works for you. If you ever get the chance to borrow a second 10P try bi-amping. If you think that bi-wiring makes a significant improvement, bi-amping will knock your socks off. The best way to do it is use one stereo amp for the left speaker and one for the right speaker - that way you avoid any possibility of cross-talk between channels. It also means that you can use long interconnects and short speaker cables. I bi-amp my centre speaker in exactly that fashion. Somewhere I've got a picture of my Home Cinema setup which shows the power amp stacks behind my speakers, I'll post it somewhere when I find it. My main speakers are bi-amped using four mono-blocks which I managed to secure for half price when Tag Mclaren were getting rid of their stocks of Audiolab 8000MXs. It made a massive improvement over the single 8000PX I had been using - and again I got to put the power amps right behind the speakers using short 1m lengths of speaker cable.
 
Tim.
PS I found the photo - forgive the quality but it was taken by Phil "I've got a fuck-off digital camera but don't know how to use it yet" Harris
 
 
-----Original Message-----
From: Alan Cockerton [mailto:alancc@xxxxxxx]
Sent: 03 August 2001 23:15
To: ukha_d@xxxxxxxSubject: [ukha_d] Digital Interconnect Review

Well we done a review tonight of digital interconnects, I was unable to get a Siltech lead as suggested by Tim so we made do with the following kit.
 
Sony DVPS525D DVD player
Arcam Alpha10 amp with Dave module
Arcam Alpha10P power amp
Monitor REF 703 speakers (bi wired)
 
Leads tested were
 
QED QUNEX SR75 £60.00
QED QUNEX P75 £25.00 (my lead)
TDK cheapo audio interconnect FREE
 
It may not be top top notch gear its still about £3500.00 worth, we had three participants two blind and one changing the leads, a range of music was listened to using the same pieces as suggested.
 
The results, they all sounded the same, even the cheapo lead. We honestly could not pick out any noticeable difference.
 
As I could not get a really expensive lead and to stretch the test a bit further I made one up using 1 mtr of 6 core alarm cable (unscreened) with two of the crappiest phono connectors I could find, these were attached by twisting the cable to the terminals rather than soldering.
 
We reviewed the QUNEX SR75 against my made up lead, again blind.
 
The results, they sounded just the same. SWMBO came in and had a listen and actually said she preferred the alarm cable, why did I spend £25.00.
 
Whilst I would not disagree that good quality interconnects for analogue signals are a must, I cannot say the same for digital.
 
The biggest improvement I found with my setup was bi wiring the speakers and using the 10P, it made a vast difference.
 
Alancc
 
 
 
 
 
 



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor


____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.