[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: LD module mounting
- To: ukha_d@xxxxxxx
- Subject: Re: LD module mounting
- From: geraint@xxxxxxx
- Date: Tue, 07 Aug 2001 14:27:16 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
If I remember, as i'm doing this at the moment.
the AD10 is equivalent of 2 mcb's in width
the LD10 is equivalent of 3 mcb's in width.
As others have pointed out, it is worthwhile leaving a spacer gap
between two modules together as in :
space - module - module - space.
This is becuase the LD10 can get quite hot and if it cannot vent it
tends to stop working.
I've not had one fail on me yet, but I do know they do get warm when
dimming.
I actually use 20way flushmount metal MK consumer units.
I have 4 in node 0, plan that they will cover the main house as it is
at the moment. If I do add an extension, then i'll add others then. I
have created the node 0 design so that either 2 or 4 more units can
go in.
Regards
Geraint.
--- In ukha_d@y..., "James Hoye" <james.hoye@s...> wrote:
> > The other thing of course, is that it look like the AD10 is
considerably
> > narrower that the LD11's (but still wider than an MCB), so how to
> > calculate
> > the size required then?
>
> I'll gracefully bow out now :)
>
> James (you're NOT changing that) H
Home |
Main Index |
Thread Index
|