The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: [OT] Media PC wireless keyboard recommendations, with integrated mouse


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Home Vision Question


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Home Vision Question
  • From: "Keith Doxey" <ukha@xxxxxxx>
  • Date: Tue, 7 Aug 2001 21:27:57 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

A relay could do that, or a digital input and output from Homevision
 
Keith
-----Original Message-----
From: steve [mailto:steve@xxxxxxx]
Sent: 07 August 2001 21:21
To: ukha_d@xxxxxxxSubject: Re: [ukha_d] Re: Home Vision Question

 

Would a relay not do
 
----- Original Message -----
Sent: Tuesday, August 07, 2001 7:46 PM
Subject: [ukha_d] Re: Home Vision Question

I forgot to mention...

I orginally wanted to use the ViaAccess Proximity key system. I have
two that I bought from Mike.

These however only give 12v when key is held up. Would be great if I
could invert that, so that 12v went through all the time, but when
the key was held up, it went to 0v.

Wonder if Keith has any ideas on that ?

thanks
g


--- In ukha_d@y..., geraint@a... wrote:
> Not got a homevision or even played/seen one.
>
> I have just got the first of my electronic locks for the doors...
>
> after all the messing around, I have left the standard five lever
> mortice locks in, but have now purchased electromagnetic ones for
> daytime convenience.
>
> The circuit takes 12v (via transformer) to power the magnet, so I
was
> thinking the easiest way was to hook this into an Appliance Module,
> wether plug in or Din Rail, so that I could switch off the circuit
> thus allowing entrance.
>
> Is there a way in Homevision to run a macro off a housecode ?
>
> Then I could send an x10 signal to turn off the appliance module,
but
> then say 5 seconds later it would turn back on again, thus securing
> the door.
>
> Thoughts ? Other ways maybe ?
>
> Regards
>
> Geraint.




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor


____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.