[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Motorised Water Valve and AD10
- To: ukha_d@xxxxxxx
- Subject: RE: Motorised Water Valve and AD10
- From: Mike Griffiths <mike@xxxxxxx>
- Date: Wed, 15 Aug 2001 23:45:47 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
If it is as you describe Join the two wires
And feed live and neutral from the A10
Putting a switch (mains rating) instead of joining would give you local
bypass not control
Which might not be a bad idea
Mike
Sent from Home
-----Original Message-----
From: geraint@xxxxxxx [mailto:geraint@xxxxxxx]
Sent: Wed 15 Aug 01 23:04
To: ukha_d@xxxxxxx
Subject: [ukha_d] Motorised Water Valve and AD10
Good evening,
I've just received two motorised water valves from letsauto.
Bit stumped on the hook up to an AD10
It has 4 wires :-
Live, Neutral, and two which when joined make the circuit and when
broken do not.
I want to hook this upto an AD10 (I do not require local control).
Just want to make sure I do the connectinos the correct way.
Anyone any ideas, or do I have to wait for Mr Doxey to get me out of
the poop again....lol
Regards
Geraint
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|