RE: OTish: basic network question

[Keith Doxey <ukha@xxxxxxx>]

hi Peter

I had problems with my laptop using two different LAN's at work and home.

The answer to my prayers came in the form of....

Multi Network Manager

http://www.globesoft.com/common/mnm_home.htm

I notice they are now on V6.1 but I have V5.3

Works really well and allows loads of different configs. You can set
different Machine Identities if you want. Different mapped drives,
printers,
network protocols and proxies.

The trial version I started with allowed 2 different configs and after 30
days you couldnt edit the configs but you could switch between them. This
was working well until my Novell client got upgraded....then it broke. I
was
so impressed with MNM that I paid my money for the full version.

Keith

-----Original Message-----
From: peter.white@xxxxxxx [mailto:peter.white@xxxxxxx]
Sent: 16 August 2001 12:44
To: ukha_d@xxxxxxx
Subject: [ukha_d] OTish: basic network question


Guys

Finally got around to connecting the Switch that I got from Scan ages ago,
but
can't get the PC's talking to each other.  All the right lights are
flashing
(on
the network cards/dongles & switch), so I think the problem is my
incompetent
s/w set-up, as opposed to the h/w.  Bearing in mind I don't know huge
amounts
about networking, my config is:

1 x PC running W2K (and ideally Internet sharing), with bog-standard 100MB
Ethernet card
1 x laptop running W98, and using Novell NetWare when logged into the
office
server (is this the problem?) with bog-standard PCMCIA Ethernet card.
1 x Dynamode switch.

The main PC (W2K) seems to be working fine, and according to the diags is
sending packet happily, so the problem is almost certainly with the laptop.
I've tried setting it to 'Client for MS networks' rather than Novell, but
it
still doesn't see anything.  When I try to renew the IP address it fails as
it
can't find the DHCP server (obviously), but I still need to be able to use
the
laptop in the office too, so the support boys won't be happy if I screw
around
with it too much. Both machines are set to the same workgroup.

Am I missing something obvious?

Pete

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/