[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: 1st Fix wiring
- To: <ukha_d@xxxxxxx>
- Subject: RE: 1st Fix wiring
- From: "James Hoye" <james.hoye@xxxxxxx>
- Date: Thu, 16 Aug 2001 14:37:14 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> A specific question also arises - outside lights.
>
> Initially I was going to wire lights & PIR as standard, using
AD10's
> to the switch (allowing for 300W limit - relays where necessary,
> unless you can recommend a DIN rail X10 jobby that can handle 500w QH
> flood lights.)
That's lots of floodlighting :)
Hmmmm, sure metal halide lamps present a 'funny' load due to the control
gear. Same for SON, SOX, MBF lamps..
James H
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|