[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: PCB making, a novel idea
- To: <ukha_d@xxxxxxx>
- Subject: RE: PCB making, a novel idea
- From: "Steve Morgan" <steve@xxxxxxx>
- Date: Sat, 18 Aug 2001 21:39:47 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Then, may I suggest....
http://www.milinst.com/drilpage.htm
Not the most attractive beast in the world, though!
Steve
> -----Original Message-----
> From: Keith Doxey [mailto:ukha@xxxxxxx]
> Sent: 18 August 2001 20:48
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] PCB making, a novel idea
>
>
> Looks like a good method for someone without a UV Exposure
> box but I prefer
> Laser print onto opaque drafting film and UV exposure for
> prototypes. Gives
> good results and is simple to do. I then get large runs of
> boards made by a
> local company.
>
> I have often thought of trying to replace the plotter pen
> with a small drill
> so that I could drill PCB's or mill cutouts into plasic or
> thin aluminium
> cases but I havent had the time or space to try it
> out.....but one day :-)
>
> Keith
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|