RE: 2nd set of speakers

[Keith Doxey <ukha@xxxxxxx>]

Feed BOTH amps from the DDAR using a couple of Y splitters.

Assuming the second amp has 2 input use 1 for DDAR, the other for all other
MainAmp sources or use the Line-Phono converter thet Patrick posted about.

Keith

-----Original Message-----
From: Ian Oliver [mailto:ioliver.lists@xxxxxxx]
Sent: 28 August 2001 12:50
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] 2nd set of speakers


In article <000001c12fb1$f00aefd0$5dfe9284@xxxxxxx>, Keith
Doxey wrote:
> The output of the DDAR is PHONO CONNECTORS, NOT a PHONO SIGNAL.

I just connected a phone output to a phono input with phono leads. Silly
me.
:-)  I realised my mistake when the speaker cones nearly hit the opposite
wall. :-)

> It needs to go to a TUNER, AUX, TAPE, CD, DVD, VIDEO, TV, LINE
input....in
> fact any input EXCEPT Phono!!

My only spare input is "tape" and a special button needs to be
pressed to do
tape monitoring. Sadly I can't then use the "tape" output to feed
the second
amp as obviously this output if before the tape input!

> PHONO inputs are EXTREMELY LOW LEVEL and have RIAA equalisation
applied to
> them. Even if you attentuated the signal to the correct level it still
> wouldnt sound right.

Ah right. Drat. Maybe it's new main amplifier time too. :-)

Regards

Ian Oliver
Sunny Leeds, UK
Using Java on Tini for control via Dallas 1-wire




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/