[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: The Gatwick Cabling Party - write up
- To: <ukha_d@xxxxxxx>
- Subject: RE: The Gatwick Cabling Party - write up
- From: "Mark Harrison" <Mark.Harrison@xxxxxxx>
- Date: Tue, 4 Dec 2001 10:10:18 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Oh yes, indeed.
I have the most perfectly aligned cable boxes in Christendom.
Mark Harrison
Head of Systems, eKingfisher
-----Original Message-----
From: Mark McCall [mailto:mark@xxxxxxx]
Sent: 4 December 2001 09:59
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] The Gatwick Cabling Party - write up
Yes yes...but did you use your Laser level ??
;-)
M.
----- Original Message -----
From: James <mailto:james.hoye@xxxxxxx> Hoye
To: ukha_d@xxxxxxx <mailto:ukha_d@xxxxxxx>
Sent: Tuesday, December 04, 2001 10:02 AM
Subject: RE: [ukha_d] The Gatwick Cabling Party - write up
Used a 20mm holesaw to cut through the ceiling plasterboard and the
metal
'stud' at the top of the wall. Can easily pass 4 CAT5 cables down.
There
was a noggin (metal) between the uprights which had quite handy
perforations
in it at regular intervals. Had the internal walls been of wooden stud
construction then things would have been MUCH more difficult - we ran 4
CAT5s from node zero to the backbox in the wall in around 10-15 mins
towards
the end.
Home |
Main Index |
Thread Index
|