[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: How do I tell whether the phone's ringing?
- To: <ukha_d@xxxxxxx>
- Subject: RE: How do I tell whether the phone's ringing?
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Wed, 5 Dec 2001 20:41:01 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
NO !!!!
Your phone line wouldnt work properly and the merest hint of a storm would
send HomeVison to that skip in the sky.
You can use a resistor and opto-isolator connected between the Bell wire
(3)
and the A wire (5). Simply wire it to a HV port. Total cost about a quid.
I will see if I have got one and have a play.
Keith
-----Original Message-----
From: Paul Gordon [mailto:paul_gordon@xxxxxxx]
Sent: 05 December 2001 15:33
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] How do I tell whether the phone's ringing?
complete guess...
couldn't you just conect the "bell" wire from your phone line to
a HV input
port, protected by a suitable drop-down resistor, as I suppose a phone line
supplies something like 50V or so....
But I'm sure the Doxeyman will provide a sensible answer!
Paul G.
>From: "Mark Harrison" <Mark.Harrison@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: [ukha_d] How do I tell whether the phone's ringing?
>Date: Wed, 5 Dec 2001 12:55:41 -0000
>
>Before I start, let me pre-empt any responsese along the line of
>"listen", OK :-)
>
>Seriously, I'd like Homevision to "do stuff" when the phone's
ringing.
>
>The "stuff" would initially be along the lines of
>
> If I'm watching a DVD, Laserdisk of Video, then pause it
> If I'm watching broadcast TV or playing MP3s on the DDAR then turn
>the volume down a fair bit
>
>... but might turn into
>
> [DVD, Laserdisk, VCR]...and then swtich the Telly to the
>"Homevision" channel and display the incoming number
>
>Let's shelve the "how do I get the incoming number" bit for
the time
>being, and concentrate on the "how do I tell the phone's
ringing"?
>
>Any suggestions? I want a _device_ that either plugs into an input port
>on HV or sends an X-10 command. I don't want either a bit of PC
>software, nor a kit/circuit diagram ... unless it's also accompanied by
>an offer to make it up for me - anyone who's ever seen me soldering
will
>understand why I feel this way :-)
>
>Regards,
>Mark Harrison
>Head of Systems, eKingfisher
>
_________________________________________________________________
Home |
Main Index |
Thread Index
|