The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: MultiRoom FreeSat


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Dumb question re power adapter...


  • To: ukha_d@xxxxxxx
  • Subject: Re: Dumb question re power adapter...
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Sat, 22 Dec 2001 10:42:42 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Cool, thanks. I'll give it a go then...

Paul G.



>From: "Mark McCall" <mark@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: Re: [ukha_d] Dumb question re power adapter...
>Date: Sat, 22 Dec 2001 10:26:57 -0000
>
>Paul
>
>I had this problem with my laptop power supply lately when it died (in
>smoke).  I had the offer of a free replacement one of same voltage but
>HIGHER ampage.  Ran it past the DD and he reconned higher current
rating
>was
>fine.
>
>I have been using it for months now without a problem.
>
>M.
>
>
>----- Original Message -----
>From: "Paul Gordon" <paul_gordon@xxxxxxx>
>To: <ukha_d@xxxxxxx>
>Sent: Saturday, December 22, 2001 10:24 AM
>Subject: [ukha_d] Dumb question re power adapter...
>
>
> > Hi all, - a dumb question if you will indulge me.... (too much
sherry!)
> >
> > I picked a HP scanner the other week reduced from £80 to £30 as
it had
>no
> > power adapter. (which I knew I'd be able to get for about a
tenner).
> >
> > However, having had a poke around, it looks like the power
adapter from
>my
> > laptop is pretty close to being perfect... (apart from 1
thing...)
> >
> > The Scanner wants 15V, 0.8A, centre positive.
> >
> > My laptop power adapter has exactly the right size plug, and it
is
>centre
> > positive, and it also outputs 15V. However, it is also rated at
3A...
> >
> > So my dumb question is: - is the rated output current stated on
the
>power
> > brick what it is "capable" of supplying, or what it
will pump out
> > regardless... i.e. can I plug it into this scanner safely? - is
it the
>case
> > that the scanner will just draw 0.8A which the adapter will
obviously by
> > happy to supply, or will the adapter always blat 3A into the
scanner?
> >
> > Ta...
> >
> > Paul G.
> >
> >
> >
> >
> > _________________________________________________________________
> > Send and receive Hotmail on your mobile device: http://mobile.msn.com
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
> >
>




Paul G.




_________________________________________________________________

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.