The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: [OT] ADSL Max


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Floorboards



So blundering about with a claw hammer and a screwdriver probably *isn't*
the best way to go about it? :-)

Guess I'll be buying some bolster chisels tomorrow then.

G
----- Original Message -----
From: "Phil Harris" <phillip.harris1@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Sunday, December 23, 2001 11:38 PM
Subject: RE: [ukha_d] Floorboards


> Usual method is to use (at least) a pair of bolster chisels ... Wallop
> them down between the boards either side of the board to be lifted
near
> the end. Prise the two chisels outwards lifting the board at the end
...
> Repeat along the length of the board ... This should slowly
"walk" the
> board free.
>
> Phil
>
> > -----Original Message-----
> > From: Graham Butler [mailto:graham@xxxxxxx]
> > Sent: 23 December 2001 23:32
> > To: UKHA_D
> > Subject: [ukha_d] Floorboards
> >
> >
> > Anyone got any tips on how to get these up in one piece?
> > They tend to be nailed to at least 3 or more joists, ie one
> > in the middle as well as the ends, and it's proving rather a
> > pain getting them up. There was a half-sized board not
> > nailed, for access to some existing cabling, which has
> > provided me with a starting point, but it's still a real pain.
> >
> > G
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> > ---------------------~--> Send FREE Holiday eCards from
> > Yahoo! Greetings.
> > http://us.click.yahoo.com/IgTaHA/ZQdDAA/ySSFAA>
/IBOolB/TM
> >
> >
> > --------------------------------------------------------------
> > -------~->
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.