[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: LD12 & AM12 for ceiling lights
- To: <ukha_d@xxxxxxx>
- Subject: Re: LD12 & AM12 for ceiling lights
- From: "Campbell" <c.macd@xxxxxxx>
- Date: Tue, 6 Feb 2001 20:36:09 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <TFSILNNN@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
No reason at all...
I use an appliance module for my halogen lounge light (too much hum from
LM's) via an in line socket in the loft (it's a bungalow)
I have set it up so the switch must be on for the unit to work.
Campbell
----- Original Message -----
From: <peter.white@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Tuesday, February 06, 2001 7:38 PM
Subject: [ukha_d] LD12 & AM12 for ceiling lights
> Having raided Homebase (again), I've got quite a few lamp and
appliance
modules
> that are spare.
>
> Is there any good reason why I can't use these for the ceiling lights,
assuming
> I stick a 3-pin socket in line on the switched live-feed (in the
> loft/floorboards)?
>
> One other quick question - how do I/can I get the PIR sensor (MS13E)
to
tell
> Homeseer when it's getting dark? I know I can configure it so that it
only
> detects movement when it gets dark, but clearly this would only work
if it
is
> constantly being tripped.
>
> Thanks
>
> Pete
>
>
>
>
>
Home |
Main Index |
Thread Index
|