[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: FW: Macros, direct control, time based etc
- To: ukha_d@xxxxxxx
- Subject: RE: FW: Macros, direct control, time based etc
- From: "Paul Gordon" <paul_gordon@xxxxxxx>
- Date: Fri, 09 Feb 2001 18:33:23 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I mix direct control amd macros, - as I also use a seperate housecode for
each room, and I have no rooms that have more than about a half-dozen X10
modules, I have ample codes available for both - especially when you
remember that using Homeseer you can use all of the X10 commands (IE on,
off, dim, bright) as macro triggers, so you can have four macros per
address.
Paul G.
>From: "Nick Shore" <nick.shore@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: RE: [ukha_d] FW: Macros, direct control, time based etc
>Date: Fri, 9 Feb 2001 17:02:30 -0000
>
>Of course you do - (Nick sees missing jigsaw piece drop into place)
>
>Does everybody else fo this or, do they mix macros and module controle
on
>one
>simple controller ???
>
>Nick.
>
>PS. currently Pronto is out of the question
>
> > -----Original Message-----
> > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > Sent: Friday, February 09, 2001 16:58
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] FW: Macros, direct control, time based etc
> >
> >
> > I use an "all housecode" IR->X10 transceiver (bought
from
> > www.laser.com) and
> > control it from my Pronto ... that way I can activate macros and
control
> > units directly.
> >
> > Phil
> >
> > > -----Original Message-----
> > > From: Nick Shore [mailto:nick.shore@xxxxxxx]
> > > Sent: 09 February 2001 16:44
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] FW: Macros, direct control, time based
etc
> > >
> > >
> > >
> > > > I have assigned a housecode to each room of my house
(plus one
> > > > for the loft
> > > > and one for outside), this has left me with four
housecodes left
> > > > which I can
> > > > allocate to "macros".
> > > >
> > > And how do you control things, if I set my RF controller to
the same
> > > housecode as
> > > the lamps then I can control the directly.
> > >
> > > If I set them it to the same as the macros then I can only
> > > trigger macros.
> > >
> > > Do you use different controllers for each ??
> > >
> > > Nick.
> > >
> > >
> > > ------------------------ Yahoo! Groups Sponsor
> > > ---------------------~-~>
> > > eGroups is now Yahoo! Groups
> > > Click here for more details
> > > http://click.egroups.com/1/11231/1/_/2065/_/981736992/
> > >
--------------------------------------------------------------
> > > -------_->
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Home |
Main Index |
Thread Index
|