[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
X10 electronics size - automated porch light
- To: ukha_d@xxxxxxx
- Subject: X10 electronics size - automated porch light
- From: "Ray Barnett" <Barnett_Ray@xxxxxxx>
- Date: Sun, 25 Feb 2001 10:36:58 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I want to automate a porch light but can't easily replace the switch
(connected via a 3 gang switch) or tap into the wiring to fit an
inline module.
Consequently I wondered about stripping the electronics out of an
appliance module (either inline or 3 pin plug type) and hiding them
inside the porch lamp itself. So the question is, has anyone taken a
module apart already and can tell me what sort of size I can reduce
the essential bits too? It needs to be an appliance module since
ideally I want to use a low energy bulb.
Alternatively, can anyone suggest a suitable porch light that will
turn itself on at dusk, and switch off automatically after a set
number of hours? The only ones I've come across so far have PIRs
built in too.
Cheers, Ray Barnett
Home |
Main Index |
Thread Index
|