[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Wireless LANs
- To: <ukha_d@xxxxxxx>
- Subject: RE: Wireless LANs
- From: "Timothy Morris" <timothy.morris@xxxxxxx>
- Date: Tue, 9 Jan 2001 16:41:31 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Is Buffalo the AP that can come with an ISDN router? If so Ant, what have
they found concerning range compared with mainstream ?
I would add one caveat for home users - don't consider anything in a
domestic environment where you can't add an external antenna. Radiators are
not conducive to signal propagation:) Once I get the Compaq's up and
running
I think it will be a good solution, simply because you can make up the
cable
length to suit each individual PC.
Interesting on the Taiwanese thing. The Compaq cards and AFAIK the Cisco
cards are both made in Japan. A lot of the mainstream cards use a chipset
made by Intersil, which again is made in Taiwan.
Tim.
-----Original Message-----
From: ant skelton [mailto:ant@xxxxxxx]
Sent: 09 January 2001 16:28
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Wireless LANs
On Tuesday 09 January 2001 16:24, you wrote:
>
> just who are Buffalo?
My colleagues in the US have a Buffalo AP, which they haven't had any
problems with*. Apparently it's an SH3 CPU (niiiice) and an ASIX ethernet
chip, and is cheap coz it's mass-produced in Taiwan (so they reckon).
[At least, not until they took it apart to find out how it works ;)]
ant
--
ant@xxxxxxx /\/\ www.ant.org
ant@xxxxxxx (`') www.homewireless.com
()
Megawatt Winged Avenger
Home |
Main Index |
Thread Index
|