[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: X10 in Loo
- To: <ukha_d@xxxxxxx>
- Subject: RE: X10 in Loo
- From: "Phillip Harris" <phillip.harris1@xxxxxxx>
- Date: Fri, 19 Jan 2001 21:34:53 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
OK ... I pass on why but I just loaded up ActiveHome on my PC and it came
up
showing all my configured modules as off ... after a second or two it
changed the status of the graphic for my second LD10/11 to ON and 37%
brightness which should be about right.
If it shouldn't be / isn't reading the status of the module then I don't
understand where that figure is coming from as 37% isn't used in any of my
macros and the lights have been in use all evening being dimmed and
brightened as I've been watching TV and reading through the HomeVision
bumph.
I'm new to this X10 stuff I admit but it does seem as though ActiveHome is
getting a reasonable figure for the brightness of the LD10/11 from
somewhere.
Phil
> -----Original Message-----
> From: Robert Crawshaw [mailto:robert@xxxxxxx]
> Sent: Friday, January 19, 2001 5:46 PM
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] X10 in Loo
>
>
>
>
> ----- Original Message -----
> From: Phil Harris <phillip.harris1@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Thursday, January 18, 2001 5:05 PM
> Subject: RE: [ukha_d] X10 in Loo
>
>
> >
> > Hmmm ... even my crappy ActiveHome X10 setup is able to read
> the status of
> > the X10 modules that I have when I load up the software.
> >
>
>
> Hmmmmm My crappy Activehome setup doesnt read the status of x10
modules
> !!???
> Not properly anyway ! The LD10/11 modules show up a 'ghosted out'
set at
> 50% if the light is on at ANY brightness. It knows which ones are
> off....apart from one LD10/11 which i think must be an old model
> cos its the
> only one that doesnt have memory dim or soft start, this one comes up
> ghosted at 50% if on OR off.
> Appliance modules seem to show correct status. but lamp modules show
same
> as LD10/11's
>
>
> Robert Crawshaw http://www.golcar.demon.co.uk
> Member of HAUG (Huddersfield Amiga User Group)
>
> The release of Windows 2000 has been put back to the first quarter of
1901
>
> we work for a company that has global reach yet can't scratch
> it's own arse
>
>
>
>
>
Home |
Main Index |
Thread Index
|