The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: External PIR


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Video Distribution


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Video Distribution
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Sun, 1 Jul 2001 23:23:29 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

OK ... This arrangement works for me, no filters anywhere in the system taking out spot frequencies. I get nothing bleeding through in the way of terrestrial transmissions once I no longer have the RF distribution setup in the house connected to the external aerial. I have a cheapo mono VCR that I bought for my five year old and I can set the RF output of that t whatever frequency I want and pipe it into the RF distribution amp and everything works hunky-dory. I have also tried one of the Keene variable RF modulators that a friend bought and that also worked fine around the house *UNTIL* I hooked up the external RF feed from the roof aerial. Then I had no end of crap bleeding over stuff.
 
Maybe I'm lucky but when I have wanted to use the existing RF system that's in the house for piping stuff around (say when I've actually wanted a telly in Edwards room) I've not had any interference picked up in the cabling and it's worked fine.
 
Phil
 
 
-----Original Message-----
From: Mike Griffiths [mailto:mike@xxxxxxx]
Sent: 01 July 2001 23:03
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Re: Video Distribution

All I’m saying Phil is that with that set-up there will be pickup of the terrestrial stations that means you have t be very careful where you place the CCTV modulators

CCTV cams are not very good t start off with

The advise you gave would make it worse

You have t place the modulators away from known terrestrial frequencies

I take it you haven’t got any filters on the system taking out these spot frequencies

 

Mike

 

Sent from Home

 

-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: Sun 01 Jul 01 22:37
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Re: Video Distribution

 

Ext. Aerial to OnDig.

 

Ondig to AV System and KAT5 -> To bedroom (or switcher when available)

 

Internal RF distribution (from previous occupants) is not connected to anything which means I can shove anything I want around that ... including (if I wanted to) modulated CCTV.

 

Bedrom TVs have own VCRs (never see the point in distributing VCR around house)

 

I know that RF distribution is a nightmare - which is why I d n't use it! *grin*

 

Phil

 




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.