The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: Hager VB54R Enclosures


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Sky Dish and NTL cable


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Sky Dish and NTL cable
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Tue, 3 Jul 2001 23:10:59 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

you know, I think you are probably right Phil!

B.

> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 03 July 2001 19:53
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Sky Dish and NTL cable
>
>
> Keith,
>
> Get the soldering iron warmed up because I reckon once Brian's seen
'em
> he'll me winging his way over t  yours...
>
> Phil
>
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 03 July 2001 18:51
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] Sky Dish and NTL cable
> >
> >
> > You are biased though?
> >
> > I will get t  visit Phil and then,             you on the way
> > home...........
> >
> > Thanks.
> >
> > B.
> >
> >
> > > -----Original Message-----
> > > From: Keith Doxey [mailto:ukha@xxxxxxx]
> > > Sent: 03 July 2001 08:54
> > > To: ukha_d
> > > Subject: RE: [ukha_d] Sky Dish and NTL cable
> > >
> > >
> > > Most definately :-)
> > >
> > > <FX RUBS HANDS/>
> > >
> > > Dont worry about your kit being old. That is the whole point
of
> > > KAT5. Uning
> > > your existing kit t  give Multiroom AV without having t 
replace
> > > everything
> > > with QED/Linn/Meridian etc. It als  gives you the option to
mix
> > and match,
> > > something which is not possible with a fully integrated
system.
> > >
> > > Keith
> > >
> > > -----Original Message-----
> > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > Sent: 02 July 2001 23:32
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] Sky Dish and NTL cable
> > >
> > >
> > > I have seen over the past month or so how people are
praising
> > Keith's KAT5
> > > kit, I have been putting it off for a few reasons,
> > >
> > > 1,	I do not really understand what it is all about
> > > 2,	I am only now starting t  get the kit t gether t  start
the
> > > big project
> > > 3,	I do not have a lot of experience of modern Audio/Visual
> > > kit, Hey my CD
> > > player is over 11 years 	old! Technics SL-P3 bought in
> > > Germany May 1997 for
> > > ?310, a lot of money then.
> > > 4,	same as 1
> > >
> > > I will not be far away from an order soon, are they still
> > available Keith?
> > >
> > > B.
> > >
> > > > -----Original Message-----
> > > > From: Alan Cockerton [mailto:alancc@xxxxxxx]
> > > > Sent: 02 July 2001 19:25
> > > > To: ukha_d@xxxxxxx
> > > > Subject: Re: [ukha_d] Sky Dish and NTL cable
> > > >
> > > >
> > > > If you want the gear in the loft and scart connections
between
> > > then Keiths
> > > > Kat5 gear should d  the trick.
> > > >
> > > > Alancc
> > > > ----- Original Message -----
> > > > From: Brian G. Reynolds
<brian.g.reynolds@xxxxxxx>
> > > > To: <ukha_d@xxxxxxx>
> > > > Sent: Sunday, July 01, 2001 11:06 PM
> > > > Subject: RE: [ukha_d] Sky Dish and NTL cable
> > > >
> > > >
> > > > > Thanks, I will use a new single piece of cable as
a matter of
> > > course for
> > > > the
> > > > > reasons you say plus more connections could lead t
 more t
> > go faulty.
> > > > >
> > > > > As for distribution I have the cable coming int 
the living
> > > > room and int
> > > > > some box thing then out int  the NTL box, from
there it is
> > > > scart t  the TV
> > > > > and VCR. I assume scart is the way to go? so some
sort of
> > distribution
> > > > > system needs sourcing, as I just said in a reply
to Kenneth
> > Watt. Any
> > > > > suggestions gratefully received.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > B.
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Alan Cockerton [mailto:alancc@xxxxxxx]
> > > > > > Sent: 01 July 2001 19:45
> > > > > > To: ukha_d@xxxxxxx
> > > > > > Subject: Re: [ukha_d] Sky Dish and NTL cable
> > > > > >
> > > > > >
> > > > > > I don't think anyone else has replied t 
Brians post so I
> > > will have a
> > > > go.
> > > > > >
> > > > > > You can move the cable t  the new position
then reconnect it, if

> > > > > > you have to
> > > > > > extend it you would get the best results if
you replace
> the whole
> > > > > > length as
> > > > > > any joint will increase signal loss.
> > > > > >
> > > > > > The meter used was t  measure the signal
strength and allow
> > > > the fitters
> > > > to
> > > > > > align the dish, the longer the cable run the
more
> signal loss you
> > > > > > will get,
> > > > > > maybe someone knows how far you can go
without the signal
> > > > dropping out.
> > > > > >
> > > > > > T  get the signal t  the TV and VCR, if you
are only
> using the UHF
> > > > > > connection run your Ariel signal t  the sky
box then t  your
> > > > distribution
> > > > > > amp or straight down t  the TV and VCR, if
you use a
> > scart or phono
> > > > > > connection then maybe Keiths Kat5 units would
help.
> > > > > >
> > > > > > Alancc
> > > > > > ----- Original Message -----
> > > > > > From: Brian G. Reynolds
<brian.g.reynolds@xxxxxxx>
> > > > > > To: UKHA Group <ukha_d@xxxxxxx>
> > > > > > Sent: Sunday, July 01, 2001 1:01 PM
> > > > > > Subject: [ukha_d] Sky Dish and NTL cable
> > > > > >
> > > > > >
> > > > > > > Hi all,
> > > > > > >
> > > > > > > I used t  subscribe t  SKY and still
have the kit
> > > > installed, I am now
> > > > > > > starting t  build Node0 in my loft
conversion, what I wish to
> > > > > > know is, if
> > > > > > I
> > > > > > > move the Sky cable from my living room t
 my Node0 is
> it just a
> > > > > > matter of
> > > > > > > moving the cable, assembling a new cable
or is there
> more t  it?
> > > > > > >
> > > > > > > What I was wondering when the fitters
install this stuff
> > > > they connect
> > > > a
> > > > > > > meter of some sort ont  the cable
presumably checking the
> > > > > > signal strength?
> > > > > > > but has the cable length got anything to
d  with it?
> > > > > > >
> > > > > > > Next question has t  be how d  I then
get the signal from
> > > > Node0 t  the
> > > > > > > VCR/TV's.
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > > B.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ____________________________________
> > > > > > > Automated Home UK
> > > > > > > http://www.automatedhome.co.uk
> > > > > > > ____________________________________
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject t
> > > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ____________________________________
> > > > > Automated Home UK
> > > > > http://www.automatedhome.co.uk
> > > > > ____________________________________
> > > > >
> > > > > Your use of Yahoo! Groups is subject t
> > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ____________________________________
> > > > Automated Home UK
> > > > http://www.automatedhome.co.uk
> > > > ____________________________________
> > > >
> > > > Your use of Yahoo! Groups is subject t
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> >
> > ____________________________________
> > Automated Home UK
> > http://www.automatedhome.co.uk
> > ____________________________________
> >
> > Your use of Yahoo! Groups is subject t
http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/






____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.