[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Alarm Failure
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Alarm Failure
- From: "Graham Howe" <graham@xxxxxxx>
- Date: Fri, 13 Jul 2001 14:02:48 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Or alternatively, set everything up but do not connect the sirens, that way
you can test everything in place (I actually got the keypads t announce
each zone as it was triggered) before you finally enable it. Another
userful
tip, you will almost certainly have multiple devices connecting to some of
the points on the comfort board (for example I will have 6 keypads all
needing to connect to a single point) so I advise taking individual cables
out of Comfort and patching them int Krone blocks.
Regards
Graham
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|