[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Background IR Problems
- To: "'sales@xxxxxxx'" <sales@xxxxxxx>
- Subject: Background IR Problems
- From: "KIFF, Graham, FM" <graham.kiff@xxxxxxx>
- Date: Thu, 19 Jul 2001 09:21:29 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi Mike
A while ago I bought a Buffalo Splitter Block and IR Receiver t enable me
t control HomeVision in a different room. All went well, until this week.
I have purchased an NEC Plasma screen and it seems t be interfering with
my
IR signals. The feed-back light on the receiver is permanently on (but
slightly dim), if I turn the screen off, all goes back t normal operation.
Any ideas on how I can get around this.
Cheers
Graham Kiff
********************************************************************
Visit our Internet site at http://www.rbsmarkets.com
This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised t
retain, read, copy or disseminate this message or any part of it.
********************************************************************
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|