[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: OT: DVD PLAYERS
- To: <ukha_d@xxxxxxx>
- Subject: RE: OT: DVD PLAYERS
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Sun, 22 Jul 2001 18:34:35 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> Loads of information, thanks everyone. I think either the modulator,
or
the
> chip is the way to go. I was looking at the website for chipping, and
it
> looks like the sony DVP S335 player I bought is one of the most
difficult
> ones to DIY chip. Sending it accross the water is'nt really an option,
so
> maybe the modualtor is the best way to go. Does anyone know if this
will
> give me the same quality as the modulator in my video player did when
I
> played the good DVD through it ?
Should be the same...
> I know watching dvd via rf is sacriligious, but its my only option
at
this
> stage, and dare I say it, the quality is still pretty dam good... I
just
> want to make sure that I will get the same quality using one of
Keens's
> external modulators, as I did through my video player. Also, does
anone
know
> if these modulators also modulate left and right audio ?
There are *NO* modulators which have built in NICAM encoders (assuming
you're in the UK and are using a NICAM TV). All the modulators out there
(including those in satellite receivers, VCRs, TIVOs etc.) will only give a
mono signal on an RF output. They do pass through the NICAM signal from a
terrestrial aerial feed though.
Phil
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|