|
with a serial cable ?
Just about anything i have rs232 running 30m
on
plain 4 core screened cable.
If just a basic tx rx & gnd then you would
get
away with 4 core alarm cable for a temp job.
Steve.
--
----- Original Message -----
Sent: Monday, July 23, 2001 5:33
PM
Subject: [ukha_d] Extending serial
link
from PC t HV
I have recently moved my HomeVision t be nearer t my
node
0 so that I can
patch the video in t my RF modulator. As a temporary
measure I have connect
the HV t the serial port of a PC that is near
the
node 0 and everything
works fine. However this is not my main PC and is
not
connected t a UPS,
neither is it connected t Comfort. So I want t
extend
the connection from
the HV t the main PC, preferably over CAT5 as there
is
plenty of that
about. Does HV use all wires in the serial connection, if
not which does it
use and is it possible t simply map these t cables
in
CAT5 (if so which
ones should I use). Alternatively is there another
cheap
way of extending a
serial connection t about 10
metres.
Regards
Graham
____________________________________
Automated
Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.
|